BRAND: MARSHAL EXCELSIOR
PART NUMBER: ME860S-6
Designed to provide a safe way to transfer LP-Gas and NH3 without sacrificing flow. The FloKill™ Breakaway Coupling flows both directions and protects against expensive loss of product or equipment damage if a pull-away occurs during a transfer operation. One end of the breakaway coupling should be attached to a fixed or sturdy point. In the event of an excessive amount of pull force, the breakaway coupling will separate and immediately shutoff product flow in both directions.
To reconnect the valve, pressure needs to be relieved from both ends of the line, therefore it is recommended that a safe way to bleed down the line is provided upstream and downstream. After the lines have been depressurized use Marshall Excelsior’s re-installation tool (MEP128-6) for 3/4” or slide the male end into the female side and pull the collar back until they lock. After reconnection the line must be tested using Marshall Excelsior Leak Detector to check for leaks before any product is transferred. The breakaway coupling may be used on vapor or liquid lines on transports, delivery trucks, motor fuel containers, fill cabinets and other miscellaneous filling operations.
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the state of California to cause cancer. www.P65Warnings.ca.gov.
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. www.P65Warnings.ca.gov.