IMPCO LPG PROPANE CARBURETOR MIXER CA200 CA200-8-2

(PICTURES SHOWN OF THIS PRODUCT ARE ONLY FOR THE PURPOSE OF SHOWING THE BASIC DESIGN OF THIS UNIT)

FREE SHIPPING ON THIS PRODUCT ANYWHERE IN THE 48 STATES.

SHIPPING DISCOUNTS AVAILABLE TO ALL OTHER LOCATIONS WORLDWIDE INCLUDING HAWAII AND ALASKA...PLEASE CONTACT US FOR DETAILS.

                                  TECHNICAL DESCRIPTION

          THE MODEL 200 SERIES IS A SINGLE DIAPHRAGM AIR-VALVE CARBURETOR/MIXER.  IT OFFERS A 90 DEGREE AIR INLET TO PROVIDE LOW OVERHEAD CLEARANCE, AND IS AVAILABLE WITH SEVERAL AIR HORN AND THROTTLE VALVE OPTIONS.  THIS UNIT IS AVAILABLE FOR LPG, NATURAL GAS, AND DIGESTER GAS APPLICATIONS.  IT HAS BEEN SUCCESSFULLY USED FOR OTHER HYDROCARBON-BASED VAPOR FUELS AS LOW AS 500 BTU.

     THE MODEL 200 IS ALSO AVAILABLE FOR FEEDBACK APPLICATIONS WITH THE 'FB' DESIGNATION.  THESE FB MIXERS ARE ALSO AVAILABLE IN TAMPER RESISTANT CONFIGURATION, INDICATED BY THE SUFFIX "-TR" ON THE PART NUMBER.

      THE 200 MIXER PROVIDES A CONVENIENT 1/8" BALANCE PORT AT THE AIR INLET, HOWEVER, IT DOES NOT INCLUDE AIR VALVE VACUUM PORTS.  THESE PORTS CAN BE ADDED WITH MODIFICATION TO THE MAIN BODY OR ADAPTER CASTING IF REQUIRED.  ADDITIONAL LOW SPEED IDLE MIXTURE CONTROL CAN BE OBTAINED TO LEAN AIR-FUEL MIXTURES THROUGH THE USE OF OPTIONAL SHIMS.  ALL DG SERIES MIXERS REDUCE AIR FLOW BY 30%

                              TECHNICAL SPECIFICATIONS

FUEL TYPE...........................................METHANE/PROPANE (550-2500 BTU)

MAXIMUM FUEL INLET.....................PRESSURE 8.0 IN H20   

MAXIMUM BOOST PRESSURE..........5.0 psi

AIR FLOW CAPACITY..........................345 cfm @ 2.0 in hG MANIFOLD (DERATE 15% FOR METHANE)

HORSEPOWER.......................................215hp @ 2,500 BTU PER CUBIC FEET

OPERATING TEMPERATURE................-40 DEGREE C TO 120 DEGREE C (-40 DEGREE F TO 250 DEGREE F)

MATERIALS:

BODY.........................................................ALUMINUM

DIAPHRAGM.............................................HYDRIN (STANDARD), SILICONE (OPTIONAL)   

PLEASE SEE FOLLOWING DESIGN DETAILS FOR SPECIFIC PRODUCT SPECS:

• ITEM IS A  MODEL CA200 CARBURETOR WITH MIXER (CA200M-2-2)
• THROTTLE BODY:  AT2-5
• SAE FLANGE:  1-3/4"
• [A]   CENTER TO  CENTER BOLT SPACING: 84.1MM (3.313")
• [B]    BORE:   49.2mm (1.938")
• [C]    MIXER AIR HORN DIA.:   77.8mm (3.063")
• [D]    OVERALL WIDTH:  165mm (6.500")
• [E]     NPT INLET:  3/4"
• [F]     OVERALL HEIGHT:  187mm (7.375")
• [G]     THROTTLE BODY HEIGHT:  82.6mm (3.250")
• [H]     THROTTLE SHAFT DIA.:  9.5mm (0.375")
•  [I]      FLANGE TO CENTER OF AIR HORN:  123 mm (4.844")

Most of the items in our ebay store are normal stock items and will ship the same day they are paid for...however...because we sell a lot of products outside of the ebay community...please understand that on a rare occasion an item may not be available for immediate shipment.  If time is critical...please contact us to be sure the item is in stock before bidding.

Be sure to add me to your favorites list!

Check out my other items! 

Sign up for PayPal; the fast, easy, and secure way to pay online.